Fluke PPC4 - Pneumatic pressure Controller

manufacturer

• Covers the absolute range of 1 kPa (10mbar) to 14 MPa (140 bar)
• Gauge equivalent including very low differential pressures ± 150 mbar gauge
• Measurement uncertainty from ± 0.010% to 0.008% of reading
• Control precision to ± 0.0004% of Q-RPT span, default ± 0.005% of AutoRanged range
• Real time calculation and display of delivered pressure measurement uncertainty
• USB and RS232 interfaces included. IEEE-488.2 optional
• Choice of local User Interface (UI) to best fit application – TFT QVGA display with “point and click” navigation for bench top user; economical “no frills” version for computer controlled installations
   

Calibration Software COMPASS for Pressure is also available

And still delivering:

• Lowest measurement uncertainty available in a transfer standard
• 50:1 control precision turndown for extreme rangeability
• Open architecture with up to four internal and/or external reference pressure transducers
• Real time measurement uncertainty calculation and display

From the cal lab bench top to 24/7 fully automated production testing, there’s a PPC4™ digital pressure calibrator configuration perfect for your pressure transducer calibration application.

• Choice of new advanced local user interface with color display and point-and-click navigation or economical basic interface
• New Command Interpreter allows PPC4 as drop-in replacement for controllers in legacy pressure transducer calibration and test systems without costly software changes.
• New “f class” Q-RPT module for full scale performance at lower cost

The basic and advanced PPC4 includes all the pressure transducer calibration features you expect in a state-of-the-art digital pressure calibrator

• Portable pressure calibrator, rugged enough for mobile applications and standard shipment without special packaging
• Advanced user interface with full support in 11 languages
• Covers the absolute range of 1 kPa (0.15 psi) to 14 MPa (2,000 psi) and gauge equivalent, including very low differential pressure
• Control precision to ± 4 ppm of Q-PRT span, default ± 0.005% of Autoranged range
• Three different Q-RPT measurement classes available to fit different performance requirements
• Measured and delivered pressure uncertainties calculated real-time and available on remote and local interfaces
• Q-RPTs can be located in an external RPM4 so that PPC4 does not need to be shipped or removed for recalibration
• AutoRange feature optimizes and sets measurement, control and safety features for the specific range of the test beign run with a few simple entries
• Dynamic and static control modes with default or user specified parameters
• Common remote command protocol with Fluke Calibration PPC3 pressure controllers
• Multiple remote interface options: RS232 and front panel USB included, IEEE-488.2 or Ethernet and rear USB optional
• Instantaneous switching between absolute, gauge and bidirectional gauge modes without added hardware or calibration requirements
• Instantaneous switching between control and measure modes with no pressure discontinuity
• Automated AutoZeroing while vented at atmospheric pressure
• 16 SI and US pressure units as well as user definable uits
• Simple, objective pressure “ready/not ready indicator with user adjustable criteria
• Automatic pressure head correction
• On-board, programmable calibration sequences with UUT tolerance testing
• Automated leak testing routines
• Valve drivers option for system design
• Automated self purging liquid trap (SPLT) accessory available for protection against liquid contamination
• Flash memory for simple and free embedded software upgrades from flukecal.com
• …and much more